In this tutorial, I will teach you how to cut your own diamond templates for quilting. Many templates are too difficult to make yourself, but diamonds are a breeze. This is an easy free tutorial to enable you to make templates quickly and without too much expense.
For this tutorial you will need
1. Paper, card or mylar (these are in order of how long they last. If you want throw away templates, you can use paper, thin card can be used several times, mylar is long-lasting
2. Either a quilting ruler that has a 60° angle or a cutting mat that has a 60° angle
3. A rotary cutter or failing that scissors
For accuracy I use a cutting mat and a rotary cutter, with a solid steel ruler. My ruler is non-slip and perfect for the job. I usually use thin card.
1. Place your card on the cutting mat, lining it up so that it is straight.
2. Place your ruler along the 60° angle line.
3. Cut the width of the ruler. This ruler is 5cm (2″) wide. It produces a 9-patch diamond that is 15cm (6″) across when stitched together with the quarter inch seams added. You can use a narrower ruler for a smaller diamond.
4. Take your card strip and place the ruler aligned with the straight edge. Cut the width of your ruler. You have one diamond. Repeat to make more, using as much of the card as you can.
5. Place the card face down on the reverse of the fabric.
6. Allowing a quarter inch seam, cut around the card.
7. Although your card template needs to be accurate, when cutting fabric, you can cheat a little, as long as there is enough fabric to fold over and you can secure your seam.
8. Whip stitch diamonds together with right sides facing.
Words, work and images copyright Karen Platt. This tutorial is for your own personal use ONLY and is not to be copied nor distributed by any means without written permission from the author.